Afina Radiance LED Backlit Mirrors

Afina's Radiance frameless mirrors add dimmable ambient LED backlighting in eight shapes and 37 models, with a 1-inch bevel or polished edge and a three-quarter-inch wall projection. Order from our Morristown and Denville NJ showrooms.

Afina Corporation introduced the Radiance collection of LED backlit frameless mirrors in September 2026, and it is available to order now from Your Showroom at TPS. A backlit mirror is not the same thing as a lighted mirror, and the distinction matters when specifying one. A lighted mirror places LED on the face of the glass, directed at the user, for shaving and applying makeup. A backlit mirror places the LED behind the glass, directed at the wall, so the mirror appears to float within a halo of light. Radiance is the second kind: it provides dimmable ambient light and is not intended to light the face. Each Radiance mirror stands off the wall by approximately three quarters of an inch, and that gap is the entire point of the product, because it is the space the light escapes through to wash the wall behind the glass. It also means no recessing, no wall cut-out, and no framing work, since the mirror hangs on an aluminum French cleat supplied with it. One consequence worth planning for is that the wall finish behind the mirror becomes part of the fixture: a smooth pale wall throws a soft even halo, while a dark or heavily textured wall absorbs and scatters the light and the effect becomes much quieter. The collection comprises eight designs. Oval, Round, Arch Top, Scallop Top, and Double Arch are shape variations, and the remaining three are rectangles that differ by edge treatment rather than outline. Every shaped mirror carries a one inch bevel, the angled perimeter cut that catches light and reads as traditional. The rectangles are offered three ways: the same one inch bevel, a flat polished edge with no bevel for contemporary rooms, and a radius polished edge, which is the polished rectangle with softened corners for use over a curved sink or a rounded vanity. All three are backlit identically and the edge changes only how the glass itself reads. Thirty-seven models are available. The one inch bevel mirrors are: Oval RM-326-LED at eighteen by twenty-six inches and RM-332-LED at twenty-four by thirty-two inches; Round RM-418-LED at eighteen inches diameter and RM-424-LED at twenty-four inches diameter; Arch Top RM-525-LED at sixteen by twenty-five, RM-530-LED at twenty by thirty, RM-520-LED at twenty by thirty-five, and RM-535-LED at twenty-four by thirty-five inches; Rectangular RM-612-LED at sixteen by twenty-two, RM-616-LED at sixteen by twenty-six, RM-620-LED at twenty by twenty-six, RM-630-LED at twenty by thirty, RM-624-LED at twenty-four by thirty, RM-636-LED at twenty-four by thirty-six, and RM-640-LED at thirty by thirty-six inches; Scallop Top RM-725-LED at sixteen by twenty-five, RM-730-LED at twenty by thirty, RM-720-LED at twenty by thirty-five, and RM-735-LED at twenty-four by thirty-five inches; and Double Arch RM-926-LED at sixteen by twenty-six, RM-932-LED at twenty by thirty-two, RM-920-LED at twenty by thirty-eight, and RM-938-LED at twenty-four by thirty-eight inches. The polished edge rectangles cover the same seven sizes as RM-612-P-LED, RM-616-P-LED, RM-620-P-LED, RM-630-P-LED, RM-624-P-LED, RM-636-P-LED, and RM-640-P-LED, and the radius polished edge versions add the RA designation as RM-612-P-RA-LED through RM-640-P-RA-LED. Custom sizes are available on request. Contact either showroom for current pricing on any model. The single most common ordering error is orientation. Every Radiance mirror ships set up to hang vertically, and a horizontal installation must be specified at order time by adding the letter H to the end of the model number, so RM-640-LED becomes RM-640-LED-H. This is not a field adjustment, because the cleat and the light housing are oriented at the factory. Power should also be planned before the walls close: where the electrical supply lands relative to the mirror and how the dimming is controlled are decisions the electrician needs before drywall, and our staff will confirm current electrical requirements and damp-location listing with Afina in writing before an order is placed. Afina Corporation builds from Paterson, New Jersey, about twenty-five minutes up Route 80 from our Denville showroom, which keeps the supply line short for a Morris County bathroom. Visit Your Showroom at TPS — Denville, 424 Route 46, Denville NJ 07834, (973) 957-0000, or Morristown, 108 Ridgedale Ave Building 4, Morristown NJ 07960, (973) 538-1440.

Your Showroom at TPS is a premium kitchen and bath showroom in Morris County, New Jersey with two locations. Our Morristown showroom is at 108 Ridgedale Ave, Building 4, Morristown NJ 07960 — call (973) 538-1440. Our Denville showroom is at 424 Route 46, Denville NJ 07834 — call (973) 957-0000. We carry over 70 brands and 336,000 products including faucets, sinks, vanities, tubs, showers, toilets, lighting, cabinets, and hardware. Free design consultations are available at both locations. Walk-ins welcome.

Morristown hours: Monday through Friday 8am-4pm, Saturday 10am-1pm, closed Sunday. Denville hours: Tuesday, Wednesday, Friday 10am-5pm, Thursday 10am-7pm, Saturday 9am-2pm, closed Monday and Sunday.