Question 1

What bore size do Emtek door levers and knobs require?

Accepted Answer

Emtek standard door hardware uses a 2-1/8 inch bore hole with a 2-3/8 inch or 2-3/4 inch backset. Most modern interior doors are pre-bored to these dimensions. Check your door prep before ordering.

Question 2

How do I install an Emtek EMPowered smart lock?

Accepted Answer

Emtek EMPowered smart locks install in a standard 2-1/8 inch bore hole, same as their mechanical hardware. They require 4 AA batteries (included). WiFi connectivity is handled through the August app — no hardwiring or special tools needed.

Question 3

What is the standard mounting height for Emtek door hardware?

Accepted Answer

Standard door hardware mounting height is 36 inches from the finished floor to the center of the bore hole. This is a building code standard, not Emtek-specific. Verify your local code if doing new construction.

Question 4

What screw sizes does Emtek cabinet hardware use?

Accepted Answer

Emtek cabinet pulls and knobs use standard 8-32 machine screws. Common center-to-center spacings include 3 inch, 4 inch, 6 inch, 8 inch, and 12 inch for appliance pulls. Screws are included with each piece.

Question 5

How do I install Emtek pocket door hardware?

Accepted Answer

Emtek pocket door pulls require a mortise cut into the door edge. Dimensions vary by model — round pulls need a circular mortise, rectangular pulls need a rectangular one. Use the Emtek-provided template for precise routing.

Question 6

Where can I find Emtek installation guides and specs?

Accepted Answer

Visit emtek.com for product specifications and installation guides. Emtek provides detailed templates for door prep and mortising. Our showroom team can also help you select the right hardware for your door thickness and configuration.

Emtek Installation Guides, Bore Specs & Sizing