Question 1

What screw size do Jeffrey Alexander pulls use?

Accepted Answer

Jeffrey Alexander (by Hardware Resources) pulls typically use 8-32 screws. Standard lengths are included with each piece. For thicker drawer fronts (over 3/4 inch), you may need longer screws — available from Hardware Resources.

Question 2

How do I install a Hardware Resources pull-out waste container?

Accepted Answer

Hardware Resources pull-out waste containers mount inside the cabinet using the provided side-mount or bottom-mount brackets. Most models fit standard 12-inch, 15-inch, or 18-inch base cabinets. Check the required cabinet opening width before ordering.

Question 3

How do I install a Hardware Resources lazy susan?

Accepted Answer

Hardware Resources lazy susans mount to the cabinet shelf using the included hardware. Full-round models require a standard corner or base cabinet. D-shaped models fit blind corner cabinets. Verify your cabinet dimensions against the product spec sheet.

Question 4

What sizes do Hardware Resources pull-out drawer organizers come in?

Accepted Answer

Hardware Resources offers pull-out organizers for base cabinets from 9 inches to 24 inches wide. Each organizer has specific cabinet opening requirements. Check the model specifications at hardwareresources.com for your cabinet size.

Question 5

Are Jeffrey Alexander pulls compatible with soft-close drawers?

Accepted Answer

Yes — Jeffrey Alexander pulls mount to the drawer front, not the slide mechanism. They work with any drawer slide type including soft-close, undermount, and side-mount slides. Standard 8-32 machine screws are used for mounting.

Question 6

Where can I find Hardware Resources installation guides?

Accepted Answer

Hardware Resources provides installation guides at hardwareresources.com under each product detail page. For Jeffrey Alexander decorative hardware, installation is straightforward — drill pilot holes using the included template and secure with provided screws.

Hardware Resources Installation Guides & Specs